Description
Hi and thanks for coming this far,
Amplifiers are not all the same and this is a classic example of this fact,
Matchmaster has been around as long as the fj holden, and in fact, made the original tool kits that went into them.(FYI)
the “other brand “Kingray although very good cannot compete with the specifications of this unit, it has 4 g filtering and is in a full-metal housing
this is quality at its best make no mistake.
this can be used purely for UHF only or VHF or a combination of the 2
also back by customer service and a generous warranty.
no fancy pants advertising here, just quality and back up service.
Features and Benefits
- Built-in 4G LTE 694MHz low pass filter
- Filtering at 750MHz is >50dB at maximum gain for UHF of 34dB
- The VHF input return loss is >12dB with a noise figure of <4.8dB and UHF input return loss is >11dB with a noise figure of <2.9dB
- Can be used with a combination antenna or separate VHF and UHF antennas by setting the built in switch
- Power through switch to drive extra amplifiers for both VHF and UHF
- The pack contains a 14VDC power supply and a cable tie for mounting
Specifications
Amplifier | |||
---|---|---|---|
Input 1 | VHF | ||
Input 2 | UHF or VHF+UHF | ||
VHF frequency range | 174-230MHz | ||
VHF gain switchable | 10/20/28dB | ||
UHF frequency range | 520-694MHz | ||
UHF gain switchable | 15/25/34dB | ||
Input Mode selector | Mode 1 | Mode 2 | |
VHF In | No signal | VHF | |
UHF/V+U In | VHF+UHF | UHF | |
Output | Output to System (14VDC Input) | ||
Return loss | >12dB typical | ||
Output | >102dBuV | ||
Noise figure | <=5dB | ||
Impedance | 75 Ohm | ||
Power consumption | 100mA | ||
All “F” female connectors | |||
Alloy diecast housing dimension | 93 x 66 x 1.5mm | ||
Waterproof ABS plastic housing dimension | 123 x 108 x 50mm | ||
Power Supply | |||
Power adaptor | 190-240V AC/50-60Hz | ||
Output | DC 14V/300mA | ||
Antenna Port | ‘F’ Male | ||
TV Port | ‘F’ Female | ||
Nickel plated alloy housing | |||
DC cable length | 1.8m |