Satellite Dish 65cm kit for foxtel vast FTA

HI! yes you have discovered the real deal, this dish configuration will allow you to receive Foxtel and /VAST TV satellite services. 65cm Diameter is sufficient for most of the easter seaboard. all you need is some rg6 quad cable just select how many meters you want and ill make up the leads for you, just mention this in check out.

THE DISH

Patented double rolled edge. Galvanised steel reflector. Charcoal colour, powder coat finish. Stainless steel hardware. Az/EI mount type with 360° Azimuth Alignment. 40mm LNB clamp included.

Now available with a quick-release detachable LNB arm for portable use.

• Reflector: Offset
• Aperture Efficiency: >80%
• Horizontal Axis: 65cm
• Vertical Axis: 74cm
• Gain @ 12.5GHz: 37.6dB
• Focal Length: 32.5cm
• F/D Ratio: 0.5
• Elevation Alignment: 15° – 85°
• Pole Diameter: 30 – 48mm
• Operation Wind: 80Km/h
• Survival Wind: 180Km/h

The LNB

• High Gain Dual Polarity 10.7GHz LO
  Ku Band LNBs
  • Higher gain
  • New ultra-compact design
  AIL107SH
  Single
  AIL107TH
  Twin
  Outputs 1 2
  Input Frequency Range 11.7GHz to 12.75GHz
  Output Frequency Range 1000MHz to 2050MHz
  L.O. Frequency 10.7GHz
  L.O. Accuracy Initial Accuracy (@ 25°C): ±1MHz
  L.O. Temperature Drift -30oC to +60oC: ±1.5MHz
  L.O. Phase Noise
  @ IKHz Offset: -60dBc/Hz
  @ I0KHz Offset: -80dBc/Hz
  @ I00KHz Offset: -95dBc/Hz
  Noise Figure @ 25°C: 0.7dB (typ.)
  Conversion Gain @ 25°C: 60dB to 72dB
  Gain Flatness
  6dBpp (typ.) / entire band
  1.5dBpp (typ.) / 27MHz
  L.O. Spurious -30dBm max.
  Image Rejection 40dB min.
  Output VSWR 2.0:1
  Cross-Pole Isolation 20dB min.
  Supply Voltage
  Vertical Polarisation: 10.5V to 14.5V
  Horizontal Polarisation: 15.5V to 21.0V
  Current consumption 100mA max. 115mA max.
  Load Impedance 75Ohm
  Reflector Type Offset
  F/D Ratio 0.6
  Feedarm Mount 40mm Ø
  Storage Temperature -30°C to +60°C
  Output Connector 75Ω F type

The Flexy Mount tin roof